Dec 27, 2016

Plant Inspector- Qatar Long term, Qatar, DECO/17/101


Required: Plant Inspector- Qatar Long term, Qatar, DECO/17/101

We have an immediate opening, mobilization time -1 week,

The assignment will be long term, starting from now “ASAP” and for 5 years.
The work will be 5 days /week, 8 Hrs./day ( overtime is applicable)
Rotation will be 2 weeks every 6 month.( unpaid leave)
Bachelor Accommodation, local transportation provided.

Qualification Required:
BE. In mechanical / Metallurgical Engineering discipline or equivalent
Certified API 510,570,API 653
ASNT Level II or equivalent in (UT,MT,PT,VT)

Min. 7 years’ experience working as Plant inspector in Petrochemical plants or similar.
Fit to work inside vessels, Good knowledge of international codes and standards

if acceptable, mail to dynamic_engi@yahoo.com, to proceed with CV submission,
send CV in word format with Certificates, 
Mention the minimum expected salary per month in QAR (with current market trends).
acceptance to join in 1 week time, mention if there is any Valid RP in Qatar.

Jul 3, 2016

Requirement for Long term and Short term/Shutdowns in Qatar.

Requirement for Long term and Short terms in Qatar.

Inspection Professionals Experienced in Oil and Gas in-service plants can apply,
Minimum 10 yrs of experience in In-service inspection and Shutdowns required,
Personnel with Approvals in Major Qatar Projects are preferred.

Welding Inspectors - CSWIP 3.1/3.2
Coating Inspectors/ Surveyor-NACE II/NACE III
Corrosion Technologist - NACE Senior Corrosion Technologist
NDT Level III Supervisors- ASNT LEVEL III
ADV.NDT Technicians with ASNT Level II/PCN Level II(IRIS/PAUT/TOFD/LRUT)
Rope Access IRATA Level II,Level II API 570 Inspector
Rope Access IRATA Level II,Level II Coating Inspector

Send your CV in word format with Educational and Technical Certificates,
Expected Day rate in USD ________per month/Day,
Notice period ______Days/Month
Qatar Visa if any_____

Note: Suitable candidates will be notified once shortlisted.

Mail ID: dynamic_engi@yahoo.com, support@dynamicengineers.net

Jun 21, 2016

Required Civil Engineers, Qatar for 6 month duration.

Required Civil Engineers, Qatar for 6 month duration.

Civil Engineers with Experience in Civil, Steel Structural construction of Mega Mall projects , Rail Projects etc can apply

Minimum 10 Yrs of Experience required..

Major activities like:
Check the necessary technical compliance
Review and endorse all Shop Drawings
Review and endorse testing and commissioning plan and ITP plan
 Review and endorse Material Submittals
 Review and endorse Method Statements
 Inspect and endorse the materials on site
 Review and endorse samples of materials
 Perform visual site inspections and endorse the requests for inspections (RFI)
Review and endorse Subcontractor’s proposed corrective action to the Non Conformity
 Review and endorse the As-built drawing
 Review the red line marking drawings (pre As-Built drawings) every 3 months and issue a report
Participate in technical meetings when required by the Contractor /Engineer/ Employer;
Participate and monitor SAT (Site Acceptance Tests).
 Review, inspect and endorse testing and commissioning works on site.
 Review and endorse the final Taking Over package

General Requirements
a. The Supervision Engineer (SE) warrants that it and the SE Staff shall exercise the professional level of skill, care and diligence that may be expected of an engineer experienced in providing services similar to the services in relation to projects of a similar size, scope and complexity in the performance of the services.
b. The SE will comply with any applicable decree, resolution, law, statute, act, ordinance, rule, directive (to the extend having the force of law), order, final non-appealable judgment directly applicable to the SE, treaty, code or regulation (including but not limited to any of the foregoing relating to health and/or safety matters or any environmental law) or any interpretation of the foregoing, as enacted, issued or promulgated by any governmental instrumentality that is publicly available and published or which the SE has or reasonably should have knowledge, including amendments, modifications, extensions, replacements or re-enactments thereof and the terms and conditions of this agreement.
c. The SE shall be responsible for all and any documents prepared by it or on its behalf in connection with the services; and no approval, certification, payment and/or rejection by the Employer & Main Contractor and/or on its behalf shall in any way limit in any way SE’s obligations/liabilities.
d. The SE shall without any delay notify Main Contractor of any anticipated or actual problems, issues or concerns involving the services and the project (in particular but not limited to any which may affect the scope, cost or duration of the services) and shall make prompt recommendations with respect thereto.
e. The SE staff shall be suitably qualified and experienced to perform the Services. The Main Contractor’s approval of any SE staff shall not relieve the SE from any of his responsibilities, obligations and/or liabilities under this agreement. During the term of this Agreement it shall be at the Main Contractor’s sole discretion to require changes in the SE staff assigned to provide services, if in the opinion of the Main Contractor such SE staff are not performing their duties or the services in the best interest of the project.
f. The SE shall not replace any SE staff without the prior consent of the Subcontractor and the Main Contractor.
g. All reports required to be produced by the SE as part of the services shall be addressed to the Main Contractor with a copy of each report provided to the subcontractor.

Accommodation, Transport, Medical by client, 6 days per week and 10 hrs per day duty.
Interested Candidates can send their CV in word format with Degree/Diploma certificates to dynamic_engi@yahoo.com, with expected monthly salary in QAR COB by 22nd June

Jun 15, 2016

Cathodic Protection Technician, Qatar - 5 years contract

Cathodic Protection Technician Required: Long Term at Qatar, 5 Years Duration, Personnel looking for Long term and secure job opening can apply. The project duration is 5 years, 8 hours/day, 6 days a week, overtime as per law. Accommodation, Local transport, Visa, Ticket, Medical by client. Mandatory Requirements: Diploma in Mechanical/Electrical Engineering NACE CP level-1(added advantage).Three (3) to five (5) years experience in Cathodic Protection Inspection surveys in oil & gas fields.Knowledge and experience of Cathodic Protection at all stages in new projects and existing operating system including preparation of finding and remedial actions report. send CV's in word format to dynamic_engi@yahoo.com, support@dynamicengineers.net

May 31, 2016

NDT Training in Madurai

ASNT NDT level ii,Course 
RT, UT, MT, PT,VT, RTFI Methods, 
Every Month at Trichy/Madurai (Tamilnadu State, INDIA), 1 Month Duration,
INR 20,000/-. Shared Accommodation Free.

Jan 18, 2016

Required Professionals for Shutdown in Qatar for 45 days

Required Professionals for Shutdown in Qatar for 45 days,

Experienced professionals in Oil and gas, Refinery Shutdowns with minimum 5 yrs and with total of 10 years.

Required Position:
Plant Inspectors:Min 5-8 years experience, Deg/Dip with API 510,570,AWS/CSWIP, NDT
Welding Inspector:Min 5-8 years experience, Deg/Dip with CSWIP 3.2.2, NDT
Coating Inspector:Min 5-8 years experience, Deg/Dip with NACE-II/BGAS Gr2.

Inspectors available to mobilize in end of January for 45 days can apply with expected day rate for 12 hrs in USD.
Accommodation, transport, by client.

send CV in word format with Certificates asap to dynamic_engi@yahoo.com, support@dynamicengineers.net for shortlisting and Client Interview in Trichy,TN