Dec 19, 2014

Mechanical Inspector Required for QP Qatar, 5 Years Contract


Mechanical Inspector Required for QP Qatar, 5 Years Contract.
for Leading Oil and Gas Major world wide.


S.N
Discipline
Duration
Working schedule
Status
Leave rotation
Required nos
1
Mechanical Inspector
5 years
5 days/week,
8 hours/day
Single/Family
15 days off for every 3 months (Single)
1 month per year (Family)
5


Mobilization date is 1st of Jan 15 or earlier upon QP’s approval. 
Requirements and JD listed below.

Interested candidates suitable for the below requirement can mail their CV with notice Period to dynamic_engi@yahoo.com, support@dynamicengineers.net.


Job Description:

Mechanical Inspectors 

Qualification – 

a) API 510 certificate and/or API 570 certificate, CSWIP 3.2, HNC in Mechanical Engineering.  
b) The candidate shall be in a good physically fit condition. The candidate shall be able to communicate fluently in English, both verbally and in writing.  
c)   He shall be fully familiar with construction drawings, isometric and P. & I.Ds.  
d)   He shall be computer literate and familiar with MS Word and Excel.    
e) He shall be able to work under own initiative. The work entails a high percentage of time on site. 
Experience – 
a) The candidate shall have minimum five (5) years’ experience in the oil and gas related business. 
b) Hold API certification for a minimum of three (3) years. 
c) He shall have proven experience of in-service inspection on oil/gas process facilities.
d) He shall be familiar with all aspects of pressure relieving devices, conventional and “in service” NDT techniques.   
e) He shall have the ability to pass QP Permit to Work system 

Duties and Responsibilites: 
1. To conduct piping, relief valve, plant and equipment inspection as directed on the Offshore Facilities. 
2. To produce rough site isometric sketches of pipelines highlighting inspection points, problematic locations, extent of scaffold access and insulation removal requirements.
3. To carry out visual surveys on piping systems to determine the condition of individual pipelines. The visual survey shall determine the exposed pipe/fitting/support condition and determine insulation removal, scaffolding and Non-destructive testing (NDT) requirement to assist in condition assessment. 
4. To produce an individual line condition report. 
5. To highlight areas of concern to Company Piping Inspector for rejection report generation.
6. To carry out detailed visual inspection of plant and equipment using suitable visual aids as may be required.
7. To provide concise, accurate technical reports on equipment inspected.
8. To report to assigned Company Inspection Engineer.
9. To liaise with NDT Technicians for report review and interpreting results.

Dec 7, 2014

Immediate Opening @ Qatar, 5Years Contract, Cathodic protection technician Project Instrument engineer, Electrical engineer, Construction Instrument supervisor

Immediate Opening @ Qatar, 5 Years Contract, Cathodic protection technician Project Instrument engineer, Electrical engineer, Construction Instrument supervisor


S.N
Discipline
Monthly rate (Qatari Riyal)
Duration
Working schedule
Status
Leave rotation
1
Cathodic protection technician
9000
 
5 years
5 days/week,
8 hours/day
Single
15 days off for worked 3 months
2
Project Instrument engineer
11000
5 years
5 days/week,
8 hours/day
Single / Family
15 days off for worked 3 months.
1 month per year (family)
3
Project Electrical engineer
11000
5 years
5 days/week,
8 hours/day
Single / Family
15 days off for worked 3 months.
1 month per year (family)
4
Construction Instrument supervisor
10000
5 years
5 days/week,
8 hours/day
Single
15 days off for worked 3 months

Find the below Job Description, send your CV with Degree certificate and Passpoer Copies to dynamic_engi@yahoo.com/support@dynamicengineers.net   asap.
1    
      Cathodic Protection Technicians
Qualification - Shall be qualified to NACE CP Tester level (or equivalent).
Experience - The candidate shall have not less than 5
Duties and Responsibilities:
years relevant experience, and be fully skilled in carrying out DCVG surveys.  Age shall be not less than 30 years and no more than 45 years.
The duties include but not limited to:
a) DCVG Surveys on pipelines in the Gas Operations
b) Conventional cathodic protection works such as potential, voltage and current measurements at test points, current drainage sources, continuity bonds, cross bonds, insulating joints and other cathodic protection hardware either as part of routine surveys or troubleshooting.
c) Cathodic Protection Technician shall be capable of creating reports for the surveys including an interpretation of the results and comments and recommendations for remedial action, where appropriate.

2-    Construction Supervisors
Qualification - Instrumentation Engineer
Experience: The candidate shall have seven (7) years experience, three (3) of which at
supervisory level.
Duties and Responsibilities:
The duties include but not limited to:
a) Assistance to CLIENT for detailed site survey to finalise design inputs of various in-house projects and PCRs.
b) Monitor site activities and progress of contractors in terms of timely  completion and adherence to standards.
c) Occasionally act as performing authority, as and when required for Construction works in sensitive areas.
d) Co-ordinate and monitor construction, tie-in or testing activities and  confirm being performed according to required standards and specifications.
e) Act as witness to site acceptance testing during pre-commissioning and commissioning of works.
f) Provide input like punch listing, verification of rectification, and co-ordinate  with Operations for their input of punch listing.
g) Co-ordinate in hand-over activities between Operations and contractors for in-house projects and modifications.
h) Assist CLIENT lead engineers to compile documents like drawings and manuals in the process of scope of services preparations.
i) Compilation and confirmation of site information required in the process of Scope of Services preparation.
j) Reviews of IFC (Issued for Construction Drawings) and provide any input prior to finalization of same.

Project Engineers (Electrical & Instrumentation)

Qualification - Electrical and Instrumentation Engineers with 10 years’ experience in
oil and gas relevant discipline.
Experience - The candidate shall have ten (10) years’ experience in engineering design works
and Contracts implementation in projects for hydrocarbon processing plants.

Duties and Responsibilities
The duties include but not limited to:
a) Assist for basic and detailed engineering design work for PCR’s and in- house projects.
b) Supervise site activities and progress of CLIENT’s contractors in terms of timely completion and adherence to standards.
c) Occasionally act as performing authority, as and when required for construction works in sensitive areas.
d) Co-ordinate and monitor construction, tie-in or testing activities and confirm being performed according to required standards and specifications.
e) Act as witness to site acceptance testing during pre-commissioning and commissioning of works.
f) Provide Input like punch listing, verification of rectification, co-ordinate with Operations for their input of punch listing.
g) Co-ordinate in hand-over activities between Operations and CLIENT’s contractors for in-house projects and modifications.
h) Assist CLIENT lead engineers in preparation of FEED and EPIC scope of work and to compile documents like drawings and manuals in the process of scope of work preparations.
i) Assist CLIENT lead engineers in confirmation of site information required in the process of scope of work preparation.
j) Review various design and construction drawings and provide input prior to finalization.